HOW TO PROPERLY FILL A GREEN GAS PISTOL

First take your bb loader and fill it with bb's. This is my KJW full metal SigSauer Licensed P226.

The aluminum tube is attached to a black plastic piece that fits over the magazine. Push the rod down firmly and fill the magazine with bb's. This automatically double stacks the bb's so no gaps occur. Once you have filled the magazine. Turn the magazine upside down. You will see a fill valve on the bottom. Take your green gas can and insert it into the fill valve. The KJW mags are the best on the market and cause no back flow, so the gas is not spraying out as you fill the mag. Ensure you are pressing firmly straight down. Fill for 5 seconds at a time. The bigger mags will take 3 five second fill times. Remember this is a full metal gun. Never shoot green gas from a plastic slide gun or one like a Tokyo Marui it simply can't take the stress and you will damage your gun. The single stack mags will take 1 6 to 8 second fill. If you feel your mag swelling or after filling with gas it is difficult to get the magazine into the magazine well, you have over filled it. Another tip is never release the gas from the rear nozzle where the hammer strikes valve to fire the gun. This will freeze up and cause the rubber gas release valve to become brittle . After using 10 magazines through the gun take some pure silicon and use a Q-tip to apply it to the rubber release valve on top of the magazine. Also NEVER silicone the air nozzle assembly. You will cause an over pressure that will cause a terminal stoppage due to the rubber O ring becoming dislodged.